Winch - MNPS 2000 lb 12 Volt (820W / 1.1HP) Cabled Switch - PBC000-CBLF1
On Back Order
|
$102.54
*We reserve the right to refuse or cancel an order for any reason, including limitations on quantities available for purchase, inaccuracies, or errors in product or pricing information, or problems identified through our efforts to avoid fraud.
Performance Specifications WCH2000-CBL, 2000lb Winch Kit
- Remote type: Hand-held cable-attached remote with handlebar mount.
- Single Line Rated Pull: 2000lbs (907kg)
- Gear Reduction Ratio: 153:1
- Motor: Permanent Magnet 1.1 HP/0.83 kW (12V DC)
- Braking Action: Mechanical and Dynamic
- Drum Diameter: 1.24in. / 3.15cm
- Drum Length: 2.88 in. / 7.3 cm
- Cable Diameter: 5/32 in. / 0.4 cm
- Cable Length: 49ft. / 15m
- Net Weight: 18.7lb. / 8.5kg
- Height: 4.1 in. / 10.5cm
- Width: 4.1 in. / 10.5cm
- Length: 7.3 in. /18.5cm
- Mounting Bolt Pattern: 3.13in. / 7.93 cm
| Line Pull | LB | 0 | 500 | 1000 | 1500 | 2000 |
|---|---|---|---|---|---|---|
| KG | 0 | 227 | 454 | 680 | 907 | |
| Line Speed (12V DC) | FPM | 10.5 | 9.2 | 7.5 | 5.9 | 4.2 |
| MPM | 3.2 | 2.8 | 2.3 | 1.8 | 1.3 | |
| Motor Current (12V DC) | Amps | 10 | 25 | 40 | 60 | 90 |
| Running Time | Minutes | 1 | 1 | 1 | 1 | 1 |
| Cooling Time | Minutes | 5 | 5 | 5 | 5 | 5 |
Remember, electric winches are desgned and constructed for intermittent use and should never be used for constant duty applications.
If the motor becomes hot to the touch, stop winching and allow cooling for 5 minutes. At or near the rated load, do not pull for more than one minute.
| Line of Cable | 1 | 2 | 3 | 4 | 5 | 6 | |
|---|---|---|---|---|---|---|---|
| Rated Line Pull | LB | 2000 | 1630 | 1380 | 1190 | 1050 | 940 |
| KG | 906 | 740 | 620 | 540 | 470 | 420 | |
| Cable Capacity | FPM | 6.5 | 14 | 22 | 31 | 41 | 49 |
| MPM | 2 | 4.3 | 6.8 | 9.5 | 12.5 | 15 | |
Associated Parts:
- WCH9100 - Winch Wireless Remote and Controller Set (2pc set)
